DFTPro is a professional Windows tool for unlocking most Brands and Android Version features bypassing FRP, resetting screen lock, flashing the firmware, etc.
In this post, we’ll guide you on downloading, installing, and using the DFTPro. You’ll learn its features, requirements, and how to bypass the frp on an Android device.
What is DFTPro?
The DFTPro Tool is a premium software that comes with unique features such as repairing IMEI or Serial number, reading and writing QCN, and NV Data, enabling diagnostic mode, modifying firmware, and unlocking or relocking the bootloader. It removes Pin, Pattern, Password, FRP Lock, and Factory Resets from any Android phone in a few seconds.
Features
- Read/Write Firmware: Supports MTK, Qualcomm (QCOM), and Spreadtrum (SPD) devices.
- FRP Reset: Bypass or reset Factory Reset Protection.
- Production Line Reset: Perform a full factory reset for production.
- Preloader Re-establishment: Rebuild the preloader on MTK devices.
- NVRAM Backup and Restore: Backup and restore NVRAM data, crucial for network settings.
- Reboot Options: Added recovery reboot, factory mode reboot, and Meta mode reboot.
- EFS Management: Backup, restore, and reset EFS data.
- Bootloader Management: Unlock and relock the bootloader.
- Screen Lock Reset: Reset screen locks.
- EDL Mode: Reboot to Emergency Download (EDL) mode for Qualcomm devices.
- And more… Includes various other advanced functions.
Read More:- RomFW v0.1 New Setup Download
Download DFTPro 5.0.2
Below are the download links for all versions of the Flash tool for Windows (32-bit or 64-bit).
File Password: a2gsmtools.com
Best Alternative: UnlockTool.net v2024.08.22.0 Latest Version
How to Use DFTPro
Follow these simple step-by-step guide to complete the installation:
- Download and Install: Download the latest version from the above links and install it on the computer.
- Open the Tool: Go to Desktop, Run DFT_PRO.exe, and open the tool.
- Log in: Now enter your username and password to log in (if required).
- Select Function: Select the specific function “Reset User Data” or “Remove FRP.”
- Connect Phone: Power off and Hold Vol Up & Down Keys and computer via USB cable. (Some devices need Test Point to boot the device into EDL, BROM, and Preloader mode.).
- Unlock Process: The tool will automatically detect your device and start the flashing process. (it usually takes some time; be patient.)
- Restart Device: Once done, disconnect and Power on your device. Your device will restart. You’re all set!
Troubleshooting Tips
- If the computer does not recognize your device, please reinstall the USB driver, change the COM Port, and restart your computer.
- If the tool doesn’t detect your device, ensure your device is properly connected via USB and it is fully charged.
- Always use Original or Good quality USB cables.
- If installation fails, disable the Windows Defender, Antivirus, or Antimalware installed on your computer.
Disclaimer: “This blog is for learning purposes only. Use it on your device, and don’t use it on someone else’s device without their permission. Make sure to back up your data before using the Tool. I am not responsible if you lose data or damage your device.”
FAQs
Is DFTPro Tool free to use?
Can I use DFT PRO on any Samsung device?
Is there a free alternative tool to remove FRP?
Is there any crack available for the DFT Pro Tool?
Conclusion
DFT Tool is an essential tool for anyone working in the GSM field, thanks to its advanced features and extensive device support. With DFT Tool, you can perform a wide range of functions quickly and easily, saving you time and effort. Whether you’re a professional technician or a DIY enthusiast, the DFT Tool is a must-have tool in your toolbox.
If you found our guide helpful, please leave a comment below. Your feedback helps us make improvements and create more useful content in the future.
