MTF Huawei Module v1.0 Sigmakey Latest Download

MTF Huawei Module 1.0 is a lightweight tool designed to format Huawei devices and fix issues like factory reset and FRP (Factory Reset Protection) lock. However, to use this module, you must have SigmaKey software installed. Without it, the module won’t work properly. A special thanks to Monkey D. Cell and Warriors-GSM for providing this tool.

Here, I have shared direct download links for the flash tool and provided step-by-step instructions for downloading, installing, and removing FRP.

How to Use MTF-Huawei Module 1.0

Step 1: FRP Reset & Fastboot Format

This tool helps reset Huawei devices, but sometimes, after formatting, the device may get stuck on the logo screen. If that happens, follow these additional steps to fully remove FRP and reset the device.

Preparation:

1. Put the Device in Huawei COM 1.0 Mode
   • Use the test point method with a modified USB cable to enable Huawei COM 1.0 mode.
   • This step allows SigmaKey to communicate with your device.
2. Launch SigmaKey
   • Open the SigmaKey software on your computer.
3. Select the Correct Options in SigmaKey
   • Platform: Hisilicon
   • Port: Choose the one connected to your Huawei device
   • Processor: Kirin
4. Load Fastboot Mode
   • Click on Load Fastboot to establish a fastboot connection.
   • Wait for the system to detect your device.
5. Open MTF-Huawei Module 1.0
   • Once the fastboot connection is successful, launch MTF-Huawei Module 1.0.
6. Perform Fastboot Format
   • In the module, press 2 to start the fastboot format process.
   • Wait for the process to complete.

Step 2: Recovery Mode Format (If Stuck on Logo)

If the phone still shows the Huawei logo after formatting, follow these extra steps:

1. Reconnect the Device in Huawei COM 1.0 Mode
   • Again, use the test point method with a modified USB cable.
2. Reopen SigmaKey
   • Launch SigmaKey and select:
     • Platform: Hisilicon
     • Port: Connected Huawei device
     • Processor: Kirin
3. Load Fastboot Mode Again
   • Click Load Fastboot to restore the fastboot connection.
4. Remove FRP (Factory Reset Protection)
   • In SigmaKey, select Remove FRP.
   • Wait for the process to finish.