SRS AUTH Unisoc Ultimate Tool is a premium auth tool that helps you reset user data, erase FRP, and flash the firmware on Spredtrum or Uniosc devices. I have shared a guide with you on downloading, installing, and using the SRS Auth Tool.
Features
- READ DEVICE INFO
- ERASE DATA + FRP
- ERASE FRP ONLY
- FDL1, FDL2
- PAC Firmware
- Erase FRP Account
- Erase / Read partition
- Diag tool options
- Calibration Mode / Factory Test Mode
- Enter Diag Mode
- Factory Reset
- AT Command
- Read/Write IMEI
Extra:
- Auto RSA Exploit Bypass
- Auto Reboot Device
- install drivers
SRS AUTH Unisoc Tool Download Latest Version
Below are the download links for all versions of the Flash tool for Windows (32-bit or 64-bit).
Last updated: Oct 09, 2024
Developer: SRS AUTH
Version: 1.0.0
Size: 6 MB
File Password: a2gsm.com
Best Alternative:
How to Use SRS AUTH Unisoc Ultimate Tool
- Download the latest version from the above links and install it on the computer.
- Go to Desktop and run SRS-AUTH-Unisoc-Ultimate.exe to launch the tool.
- Now enter your username and password to log in (if required).
- Select the specific function “Reset User Data” or “Remove FRP.”
- Power off and Hold Vol Up & Down Keys and computer via USB cable. (Some devices need Test Point to force boot into EDL, BROM, and Preloader mode.).
- The tool will automatically detect your device and start the flashing process. (it usually takes some time; be patient.)
- Once done, Your device will restart. You’re all set!
Disclaimer: “This blog is for learning purposes only. Use it on your device, and don’t use it on someone else’s device without their permission. Make sure to back up your data before using the SRS auth tool. I am not responsible if you lose data or damage your device.”
If you found our guide helpful, please leave a comment below. Your feedback helps us make improvements and create more useful content in the future.
