TSTool v1.1 ADB FRP MDM Bypass Knox Android 14 

TSTool is a powerful tool that helps you remove FRP and bypass MDM lock, Knox, and IT admin on Samsung devices in a few steps. I have shared a guide with you on downloading, installing, and using the TSTool.

Features

1. Device Information and Connectivity
   • Read Information via ADB: Fetch detailed device data using ADB.
   • COM Port Connectivity: Establish connection through COM3 (Intel® Active Management Technology – SOL).
2. ADB and Fastboot Management
   • Activate ADB Testmode: Enable ADB for enhanced device control.
   • Baseband Information: Access baseband details like S9010ZCU7EXH8.
   • SIM Status Check: Monitor the SIM card status (e.g., LOADED).
3. Security and Bypass Features
   • MDM Bypass Knox: Bypass Mobile Device Management (MDM) and Knox security protections.
   • FRP Reset: Reset Factory Reset Protection (FRP) for Android 14 devices.
   • Bypass KG Qualcomm: Override Qualcomm’s Keyguard.
   • ADB FRP 2024: Reset FRP using ADB commands.
4. Reset and Flashing Options
   • Factory Reset: Restore the device to factory settings.
   • Hard Reset: Perform a deeper reset for more severe issues.
   • Soft Reset: Apply a minor reset for lighter issues.
   • RPMB Reset: Reset the Replay Protected Memory Block (RPMB).
5. Partition and Firmware Management
   • Partition Manager: Read, write, erase, and format eMMC partitions.
   • Firmware Flashing: Easily flash new firmware versions onto the device.
   • Backup and Restore: Backup and restore EFS (Encrypted File System) data.
6. Additional Tools
   • QR FRP: Use Quick Response (QR) codes for FRP reset.
   • MTP Bypass: Bypass Media Transfer Protocol (MTP) restrictions.
   • BROM FRP: Bypass FRP in Boot ROM (BROM) mode.
   • Log Management: Save logs for troubleshooting and diagnostics.
7. IT Admin and Qualcomm Bypass
   • IT Admin Fix: Resolve issues related to IT administration.
   • Qualcomm Bypass: Bypass security features on Qualcomm chipsets.

TSTool Download Latest Version

Below are the download links for all versions of the flash tool for Windows (32-bit or 64-bit).

Last updated: Oct 10, 2024
Developer: TSTool
Version: 1.1
Size: 12.97 MB
File Password: a2gsm.com

Pass for extract: softwarecrackguru

How to Use TSTool

Follow these simple step-by-step guide to complete the installation:

1. Download and Install: Download the latest version from the above links and install it on the computer.
2. Open the Tool: Go to Desktop and run TSTool.exe to launch the tool.
3. Log in: Now enter your username and password to log in (if required).
4. Select Function: Select the specific function “KG Remove” or “Remove FRP.”
5. Connect Phone: Power off and Hold Vol Up & Down Keys and computer via USB cable. (Some devices need Test Point to force boot into EDL, BROM, and Preloader mode.).
6. Unlock Process: The tool will automatically detect your device and start the flashing process. (it usually takes some time; be patient.)
7. Restart Device: Once done, disconnect and Power on your device. Your device will restart. You’re all set!

Disclaimer: “This blog is for learning purposes only. Use it on your device, and don’t use it on someone else’s device without their permission. Make sure to back up your data before using the TSTool. I am not responsible if you lose data or damage your device.”

If you found our guide helpful, please leave a comment below. Your feedback helps us make improvements and create more useful content in the future.