How to Fix Vivo V11 Pro PD1814F Auto Recovery Mode Boot

Vivo V11 Pro PD1814F stuck in Recovery Mode or Restart on Logo; auto-recovery issues easily fixed by tested flash file. This article will take you through detailed instructions on how to fix it easily.

Vivo V11 Pro Specs

The phone features a 6.41-inch Super AMOLED display with a resolution of 1080 x 2340 pixels and Corning Gorilla Glass 3 protection. It runs on Android 8.1 (Oreo), upgradable to Android 9.0 (Pie) with Funtouch 6.1, and is powered by a Qualcomm Snapdragon 660 chipset with an octa-core CPU and Adreno 512 GPU. It offers 64GB or 128GB of internal storage with 6GB of RAM and has a dedicated microSDXC slot.

Download Vivo V11 Pro PD1814F Flash File

• Vivo_V11_Pro_PD1814F_EX_Tested_Flash_File
• QPST Flash Tool
• Qualcomm Driver

Supported Tools

• UMT QCfire Tool
• UnlockTool
• QPST Tool (Free)
• EMT Tool
• Miracle Tool
• Any Qualcomm-Supported Tool

How to Flash Vivo V11 Pro PD1814F

Before proceeding with any operation on the tool, ensure you have met the following requirements:

• Take a full backup of your phone.
• Make sure the phone is charged at least 50% to avoid interruption.
• Download Firmware or Stock ROM for your phone.
• Install the USB driver for your specific phone brand.

Step-by-Step Download Guide

1. Click on the above download link to download the firmware.
2. Save the zip file to your computer.
3. Extract the firmware using WinRAR or 7Zip.

How to Flash Firmware using the UMT Tool

• Open the UMT QCFire Tool on your computer.
• Go to the Flasher tab.
• Select Brand and Model (if required)

• Tick the program and click on three dots to load the firmware.
• Locate the path and select rawprogram_unsparse.

• Tick Protect IMEI/Calibration Data to protect security files.
• Also, tick Reset FRP after Flash to remove FRP.
• Click on the Flash Button.

• Connect Vivo v11 Pro in EDL mode using Test Point.

• After connecting, check the Qualcomm HS-USB QLoader Port in the Device Manager.
• UMT Tool will detect the USB port and start flashing
• Wait for Process Complete (it will take 5-10 minutes)

• After the flashing is complete, the phone will restart.
• Done

Watch Tutorial Video