Motorola Moto E13 FRP Bypass File (.PAC) – Latest Version [2025]

If your Motorola Moto E13 is stuck on the Google verification screen, you can bypass the FRP lock using the latest .PAC format file and the Research Download Tool. This method is safe, reliable, and verified to work on the latest Moto E13 firmware.

Here, I have shared direct download links for the flash tool and provided step-by-step instructions for downloading, installing, and removing FRP.

What is FRP (Factory Reset Protection)?

Factory Reset Protection (FRP) is a built-in Android security feature introduced by Google from Android 5.0 (Lollipop) and above. It protects your device and personal data from unauthorized access after a factory reset.

When FRP is enabled, you must enter the previously synced Google account after a reset. If forgotten, your device will be locked.

How to Disable FRP (Before Reset)

To avoid FRP lock after a factory reset, follow these steps:

1. Go to Settings > Accounts
2. Tap on your Google account
3. Select Remove account
4. Confirm the removal

How to Bypass FRP on Moto E13

• Motorola Moto E13 (minimum 50% battery)
• Original USB cable
• PC with Windows OS
• Research Download Tool
• SPD/Unisoc USB Drivers
• Downloaded .PAC FRP file

How to Flash FRP File on Motorola Moto E13

Step-by-Step Instructions:

1. Install SPD/Unisoc USB Drivers on your PC (skip if already installed).
2. Extract and open the Research Download Tool.
3. Run ResearchDownload.exe as Administrator.
4. Click the Gear icon to load the .PAC file:
   • Select: sabahl_g_user_TLAS33.105_285_1_0403.pac
5. Click the Play button (Start) to initiate the flashing process.
6. Power off your Moto E13 completely.
7. Press and hold Volume Down, then connect the phone to the PC via USB.
8. The tool will detect the device and begin flashing automatically.
9. Wait for the status to show “Passed” in green.
10. Disconnect the device and power it ON.
11. Complete the setup — the FRP lock will be gone!

Read More: