Pi_Unlocker Samsung Repair Tool With Keygen Download Free

Updated on:

PiUnlocker Samsung Repair Tool

Pi Unlocker Samsung Repair Tool is a powerful tool that helps you factory reset and flash firmware on Samsung Android smartphones and tablet devices. In this post, I’ll guide you on downloading, installing, and using the Pi unlocker tool.

Features

Repair:

  • MTP Readinfo: Retrieve device information via MTP mode.
  • MTP Enable ADB server (O CRD): Enable ADB in MTP mode.
  • Factory Reset MTP (O CRD): Perform a factory reset through MTP.
  • Remove FRP server (O CRD): Remove Factory Reset Protection (FRP) via the server.
  • ADB Readinfo: Retrieve device information using ADB.
  • Driver Installer Browser Method: Install necessary drivers.
  • Bypass Browser: Bypass device restrictions via the browser.

Flash:

  • BL: Flash Bootloader.
  • AP: flash application processor.
  • CP: Flash Modem.
  • CSC: Flash Carrier Settings.
  • DATA: Flash user data.

Additional Features:

  • Reboot: Reboot the device.
  • Check MD5: Verify file integrity using MD5 checksum.
  • NAND Erase: Perform a low-level format on the device memory.

Download Pi Unlocker Samsung Repair Tool

Below are the download links for all versions of the Flash tool for Windows (32-bit or 64-bit).

File Password: a2gsm.com

VERSIONDOWNLOAD LINK
Pi Unlocker Samsung Tool.7zMega
Keygen.7zMega

Best Alternative:

How to Use Pi Unlocker Samsung Repair Tool

Follow these simple step-by-step guide to complete the installation:

  1. Download the latest version from the above links and install it on the computer.
  2. Go to Desktop and run Pi unlocker.exe to launch the tool.
  3. Click on the login button in the upper menu and select offline mode.
  4. Click generate hardware key and copy it.
  5. Run the keygen, paste the hardware key, and click generate activation key.
  6. Copy the activation key and paste it into the tool.
  7. Click log in on the tool and log in with a username and password.
  8. Select the specific function “Reset User Data” or “Remove FRP.”
  9. Power off and hold the Vol Up & Down keys and computer via USB cable. (Some devices need Test Point to force boot into EDL, BROM, and Preloader mode.).
  10. The tool will automatically detect your device and start the flashing process. (it usually takes some time; be patient.)
  11. Once done, disconnect and power on your device. Your device will restart. You’re all set!

Disclaimer: “This blog is for learning purposes only. Use it on your device, and don’t use it on someone else’s device without their permission. Make sure to back up your data before using the tool. I am not responsible if you lose data or damage your device.”

If you found our guide helpful, please leave a comment below. Your feedback helps us make improvements and create more useful content in the future.