Download Latest Firmware Flash File (Stock ROM) Collection from A2GSM.COM. You can use Stock ROM Firmware to unlock your device’s Screen Lock Password and FRP lock, and you can also use flash file to fix Bootloop, Restarting or Upgrade and Downgrade Android versions, and fix software bugs. The Stock ROM package comes in a zip file containing firmware files, Official USB drivers, Flash Tools, and a How to Install guide.
Download Realme GT Neo 5 240W RMX3708 Flash File Firmware:
About Realme GT Neo 5 240W
Realme GT Neo 5 240W is Powered by Qualcomm SM8475 Snapdragon 8+ Gen 1 4nm Latest Chipset (CPU). It comes with 8GB, 12GB, and 16GB of RAM. Realme GT Neo 5 240W comes with a 5000mAh non-removable battery and fast-charging 240W. Realme GT Neo 5 240W runs Realme UI 4.0 based on Android 13 and packs 256GB, 512GB, and 1TB of inbuilt storage and the phone does not have a dedicated SD Card slot to Extend device storage.
Realme GT Neo 5 240W China is a Qualcomm model from Realme. first boot in recovery mode by pressing the volume down button with the power key and then connect to pc with a USB cable and tap on Ver 1.2 3-5 times and click OK, your device will be connected to pc in Qualcomm 9008 mode. you can see the Qualcomm port in the device manager in pc. Click on the Start All button in the tool after the device connects, and flashing will be started. after flashing complete device will boot automatically and all screen locks will be removed and the demo mode also fixed.
Flash tools & Drivers:
Note:
- Flash at your own risk
- Make a backup before the Flashing
- Charge the device to at least 50% Prevent accidental shutdown
How to Install Stock ROM Firmware:
- Download and Extract the Stock ROM Package on the Computer.
- After extracting the Stock ROM package, you will get the Firmware, USB Driver, Flash Tool, and How-to Flash Guide.
- Install the provided USB driver on the computer.
- After installing the USB Driver, Now Open & Launch the Flash Tool.
- After Flash Tool is Open, Locate and Load the Stock ROM (Firmware) in the Flash Tool.
- Connect your Device to the computer using the USB Data Cable.
- Click on the Download button in the flash tool to start the flashing process.
- After the Flashing process is completed.
- Disconnect your device and Start it.