Redmi A3 FRP & Mi Account Remove File [MTK Scatter]

If you’ve performed a factory reset on your Redmi A3 and are stuck on the FRP (Factory Reset Protection) screen or Mi Account lock, this guide will help you bypass FRP & Mi Cloud Activation using the MTK Scatter file and SP Flash Tool.

Here, I have shared direct download links for the flash tool and provided step-by-step instructions for downloading, installing, and removing FRP.

Read More:- Motorola Moto G64 5G (XT2431-1) Frp Reset File Free

How to Bypass FRP Lock (Step-by-Step Guide)

Step 1: Download Required Files

• Download the Redmi A3 FRP & Mi Account Remove Scatter file.
• Download and install SP Flash Tool on your PC.
• Install the MTK USB Driver for proper device detection.

Step 2: Load Scatter File in SP Flash Tool

1. Extract the downloaded files.
2. Open the SP Flash Tool folder & run SP Flash Tool.exe.
3. Click on “Download-Agent” and select MTK_AllInOne_DA.bin.
4. Click on “Scatter-loading” and select MTK_Android_scatter.txt.

Step 3: Enter Manual Format Mode

1. Go to the “Format” menu and select Manual Format Flash.
2. Enter the following FRP & Mi Account Remove addresses:

Mi Account Remove Address:

Begin Address [HEX]: 0xc800000  
Format Length [HEX]: 0x3000000  

FRP Erase Address:

Begin Address [HEX]: 0x1808000  
Format Length [HEX]: 0x100000  

3. Click “Start” to remove FRP & Mi Cloud Lock.

Step 4: Disable Authentication (Auth Protection Bypass)

• Download & Run MTK Bypass Tool on your PC.
• Turn off your Redmi A3 phone.
• Connect the device to your PC using a USB cable.
• Click “Disable Auth” in MTK Bypass Tool.
• Once Auth protection is disabled, the device will enter BROM Mode.

Step 5: Flash & Remove FRP / Mi Account

• Open Device Manager and check the COM port number.
• Go back to SP Flash Tool and click Start.
• Wait for the unlocking process to finish.
• Once completed, disconnect the phone and power it on.
• Complete the initial setup—your device is now unlocked! 🎉