Vivo V11 Pro PD1814F stuck in Recovery Mode or Restart on Logo; auto-recovery issues easily fixed by tested flash file. This article will take you through detailed instructions on how to fix it easily.
Vivo V11 Pro Specs
The phone features a 6.41-inch Super AMOLED display with a resolution of 1080 x 2340 pixels and Corning Gorilla Glass 3 protection. It runs on Android 8.1 (Oreo), upgradable to Android 9.0 (Pie) with Funtouch 6.1, and is powered by a Qualcomm Snapdragon 660 chipset with an octa-core CPU and Adreno 512 GPU. It offers 64GB or 128GB of internal storage with 6GB of RAM and has a dedicated microSDXC slot.
Download Vivo V11 Pro PD1814F Flash File
Supported Tools
- UMT QCfire Tool
- UnlockTool
- QPST Tool (Free)
- EMT Tool
- Miracle Tool
- Any Qualcomm-Supported Tool
How to Flash Vivo V11 Pro PD1814F
Before proceeding with any operation on the tool, ensure you have met the following requirements:
- Take a full backup of your phone.
- Make sure the phone is charged at least 50% to avoid interruption.
- Download Firmware or Stock ROM for your phone.
- Install the USB driver for your specific phone brand.
Step-by-Step Download Guide
- Click on the above download link to download the firmware.
- Save the zip file to your computer.
- Extract the firmware using WinRAR or 7Zip.
How to Flash Firmware using the UMT Tool
- Open the UMT QCFire Tool on your computer.
- Go to the Flasher tab.
- Select Brand and Model (if required)
- Tick the program and click on three dots to load the firmware.
- Locate the path and select rawprogram_unsparse.
- Tick Protect IMEI/Calibration Data to protect security files.
- Also, tick Reset FRP after Flash to remove FRP.
- Click on the Flash Button.
- Connect Vivo v11 Pro in EDL mode using Test Point.
- After connecting, check the Qualcomm HS-USB QLoader Port in the Device Manager.
- UMT Tool will detect the USB port and start flashing
- Wait for Process Complete (it will take 5-10 minutes)
- After the flashing is complete, the phone will restart.
- Done
Watch Tutorial Video
